Filter
Top Products
2-4
2.2 External Buzzer (OP03-136, option) Connection
The optional external buzzer provides a louder alert when the guard alarm is violated.
External buzzer
Type: OP03-136
Code no.: 000-086-443
Further, you need the optional cable assy MJ-A7SPF0007-050 (w/7P connector, 5 m, code
no. 000-144-418).
1. Attach the MJ-A7SPF0007-050 cable assy (option) to the DATA 3 port at the rear of the
display unit.
2. Cut the XH connector at the end of external buzzer cable with appropriate length.
3. Solder the cables made at step 2 with MJ-A7SPF0007-050 cable as shown below.
Red
Black
External buzzer
MJ-A7SPF0007-050
Soldering
Other cable should be cut off,
and wrap here with tape.
Connection of external buzzer and display unit
using cable assy type MJ-A7SPF0007-050 cable
4. Fasten the buzzer with the double-sided tape or two tapping screws (3x15 or 3x20, local
supply).