Filter
Top Products
3-14
Contents of DATA 1 PORT menus
Item Description Settings Default Setting
FURUNO GPS
Sensor
Selects whether the GPS Receiver
GP-310B/320B is connected to the
DATA1 port or not.
Yes, No No
Output Format
Selects NMEA output version of the
equipment connected.
NMEA0183 Ver.
1.5, NMEA0183
Ver. 2.0
NMEA0183 Ver. 2.0
Lat/Lon Format
Selects latitude/longitude format to
output.
DD°MM.MM’,
DD°MM.MMM,
DD°MM.MMMM’
DD°MM.MMM’
Output Destination
Selects whether to output route (data
sentence RTE) and waypoint data (data
sentence WPL) when destination is set.
Yes, No No
SELECT SNTNC
(soft key)
Selects data sentence(s) to output. Select sentence with the cursor pad and press the
ON/OFF soft key to show ON or “- -“ (OFF) as appropriate. See the figure on the
previous page for sentence and default settings.
Contents of DATA 3 PORT menu
Item Description Settings Default Setting
NMEA Output
Format
Selects NMEA output format.
NMEA Ver. 1.5, NMEA
Ver. 2.0
NMEA Ver. 2.0
Baud Rate Sets baud rate. 4800, 9600, 19200 (bps) 4800(bps)
Bit Length Sets character length. 8 bit, 7 bit 8 bit
Stop Bit Sets number of stop bits. 1 bit, 2 bit 1 bit
Parity Sets parity bit. Even, Odd, None None
SELECT
SNTNC
(soft key)
Chooses data sentences to output. For further details see the illustration “NMEA data
sentences” on page 3-13.