Filter
Top Products
1. OPERATION
19
Data menu
This menu mainly sets up how to display data
input by external equipment.
Data menu
Nav Display 1, 2: Data for speed (SOG), speed
(STW), depth, range, bearing, position, wind,
heading, course, barom press, water tempera-
ture, time to go, trip meter, odometer or XTE can
be displayed on the left top of the screen.
Appropriate sensor is required to display data
other than depth.
Data box
Bearing: Ship's course and heading may be
displayed in true or magnetic bearing. Magnetic
bearing is true bearing plus (or minus) earth's
magnetic deviation. Requires bearing data.
Wind Spd/Dir: Choose the wind speed and
direction reference from true and apparent.
Requires wind sensor.
Apparent: The direction (in relation to ship's
heading) and speed of the wind as it appears
to those on board, relative to the speed and
direction of the boat; combination of the true
wind and the boat's movement.
True: The speed and direction (in relation to
ship's heading) of the wind felt or measured
when stationary.
Trip Source: Choose speed source for the trip
distance indication: Off, Own (speed sensor
connected to the FCV-620/585) or NMEA
(speed data from external equipment).
Temp Source: Choose source of water temper-
ature input; Off, Own (temperature sensor con-
nected to the FCV-620/585) or NMEA (speed
data from external equipment).
Speed Source: Choose source of speed input;
Off, Own (speed sensor connected to the FCV-
620/585) or NMEA (speed data from external
equipment).
Trip Reset: Choose Yes to reset the trip dis-
tance to zero. Beeps are generated while the
trip distance is being reset.
Odo Reset: Choose Yes to reset the odometer
to zero. Beeps are generated while the odom-
eter is being reset.
Data
S
/
T
/
W
/
X
: Select
[ENTER] : Enter
[MENU] : Back
Go to WPT
: Off
WPT List
Nav Display1 : Off
Nav Display2 : Off
Bearing
: True
Wind Spd/Dir
: True
Trip Source
: Own
Temp Source
: Own
Speed Source
: Own
Trip Reset
Odo Reset
15.5 k
t
82.6