Filter
Top Products
4-9
4.6 Cable Fabrication and Connector Assembling in
Transmitter Unit
Assembling 38P connector (CN-B2, CN-B3, CN-B4)
Fabrication of cables 10S1258-1, 10S1260
45
40
300
Vinyl sheath
Shield
Armor
Anticorrosive sheath
Core
Insulating tape
CN-B4: Fold back shield
onto armor.
CN-B2, B3: Expose cores;
wind shield
around armor.
Figure 4-14 Fabrication of cables 10S1258-1, 10S1260
Assembling the 38P connector
1. Bundle unused wires outside the connector case.
2. Fix the cover 1, noting the cable outgoing direction.
3. Dress the wires and fix the covers 2 and 3. Use a fragment of cable
sheath to fix the wires at the cable clamp.
4. Shorten unused wires and tape their ends with vinyl tape to prevent short
circuit.
Position No.
Guide Pin A
(Large)
Guide Pin B
(Small)
Cover 1
Insulate unused
wires with vinyl
tape.
Fragment of
anticorrosive sheath
Guide pin
Cover 3
Guide Pin A Guide
Pin B
Cover 2
Figure 4-15 How to assemble the 38P connector
Cable outgoing
direction