Filter
Top Products
1. OPERATION
19
5. Enter name or latitude and longitude as
applicable.
6. Press the MENU/ESC key to register the
window.
7. Press the MENU/ESC key again to close
the window.
1.19.2 How to edit registered
waypoints
Registered waypoints can be freely edited.
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [WPT List] and press the ENTER
key.
3. Select the waypoint to edit and press the
ENTER key.
4. Select the item desired and press the EN-
TER key.
5. Edit data as appropriate.
6. Press the MENU/ESC key twice to return
to the [WPT List].
1.19.3 How to erase waypoints
Waypoints can be erased two ways: individu-
ally or collectively. A waypoint set as destina-
tion cannot be erased.
How to erase individual waypoints
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [WPT List] and press the ENTER
key.
3. Select the waypoint to erase and press
the ENTER key.
4. The message "Erase?" appears; press
the ENTER key.
5. Select [Yes] and press the ENTER key.
6. Press the MENU/ESC key to close the
window.
How to erase all waypoints
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [Delete All WPT] and press the
ENTER key.
3. Select [Yes] and press the ENTER key.
1.19.4 How to set destination
waypoint
Set a destination waypoint to show the range,
bearing and time-to-go to that point, on the
Nav data display. See the next section for de-
tails.
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [Go to WPT] and press the ENTER
key.
3. Select a destination waypoint and press
the ENTER key.
1.20 Setting Up Nav
Data Displays
The user may arrange the nav data displays
as desired.
1.20.1 Nav data displays
1. Rotate the MODE knob to select the Nav
data display to change. (This window is
displayed for 10 seconds.)
2. Use S or T to select a data display win-
dow desired.
3. Use W or X to select the item to display.
The items that can be displayed depend
on the screen division.
/
: Window Selection
/
: Data Selection
[ENTER] : Set
[MENU] : Cancel