Filter
Top Products
3. STEERING MODE
3-15
Selecting course after the REMOTE mode is off
After the remote controller is turned off in the AUTO mode, the course mode can
be chosen to follow as below.
1. In the STBY mode, press the [MENU] knob to show the STBY mode menu.
ALARM MENU
DATA CALIBRATION
PARAMETER SETUP
DISPLAY SETUP
SCREEN SETUP
SYSTEM SETUP
TEST
SYSTEM DATA
Stby mode menu
2. Rotate the [ENTER] knob to select “SYSTEM SETUP”, and then press the
[ENTER] knob to show the SYSTEM SETUP menu.
To switch page 1 and 2, select “NEXT PAGE” or “PREVIOUS PAGE” and press
the [ENTER] knob.
KEY BEEP:
LOCK: UNLOCK
LANGUAGE: ENGLISH
PANNEL DIMMER: 8
REMOTE CONTROLLER 1: NFU
REMOTE CONTROLLER 2: NFU
CSE AFTER REMOTE:
PRESENT COURSE
NEXT PAGE
OFF
PREVIOUS PAGE
PORT 1 FORMAT: NMEA0183 V1.5
PORT 1 SENTENCE
PORT 2 FORMAT: NMEA0183 V1.5
PORT 2 SENTENCE
SIMULATION MODE: OFF
MEMORY CLEAR: ALL CLEAR
Page 1
Page 2
System setup menu