Filter
Top Products
Installation
3A0869J 13
Air Connections
See the System Pneumatic Schematic on page 72
(hazardous location) or page 73 (non-hazardous loca-
tion).
1. Tighten all ProMix 2KE system air and fluid line con-
nections as they may have loosened during ship-
ment.
2. Connect the main air supply line to the main air inlet.
This air line supplies the solenoids and all pneu-
matic control valves.
3. For each gun in the system, connect a separate
clean air supply line to the air inlet of the air flow
switch. This air line supplies gun atomizing air. The
air flow switch detects air flow to the gun and signals
the controller when the gun is being triggered.
F
IG. 3. Main Air Connection
Main Air
Inlet
TI15729a
FIG. 4. Atomizing Air Connection
Solenoid
air inlet
Atomizing
air inlets
Atomizing
air outlets
TI15709a