Filter
Top Products
Warnings
4 3A0869J
Related Manuals
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
Manual Description
3A0870 ProMix 2KE, Repair/Parts
313599 Coriolis Meter, Instructions/Parts
308778 G3000 Flow Meter, Instructions/Parts
312781 Fluid Mix Manifold, Instructions/Parts
312782 Dosing Valve, Instructions/Parts
312784 Gun Flush Box Kit 15V826
406714 Rebuild Kit for High Pressure
Dispense Valve
406823 Dispense Valve Seat Kit
3A1244 Graco Control Architecture
Module Programming
3A1323 16G353 Alternator Conversion Kit
3A1324 16G351 Electric Power Conversion Kit
3A1325 ProMix 2KE Stand Kits
3A1332 24H255 3-Color Valve Stack Kit
3A1333 24H253 USB Module Kit
313542 Beacon Tower
Manual Description
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are
present.
• Ground all equipment in the work area. See Grounding instructions.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
SPECIAL CONDITIONS FOR SAFE USE
• To prevent the risk of electrostatic sparking, the equipment’s non-metallic parts should be cleaned only
with a damp cloth.