Filter
Top Products
Setup Mode Details
3A0869J 45
Setup Mode Details
Press on any screen to enter the Setup screens. If
the system has a password lock, Password (Screen 16)
displays. If the system is not locked (password is set to
0000), Setup Home (Screen 17) displays.
Password (Screen 16)
From any Run screen, press to access the pass-
word screen. Password (Screen 16) displays if a pass-
word has been set. Set the password to 0000 to prevent
the Password Screen from displaying. See Configure 3
(Screen 20), page 46, to set or change the password.
• Press to enter the password (0000 to 9999).
Press to move between digits. Press
to change a digit. Press when field is
correct. Setup Home (Screen 17) displays.
• Press to toggle between Run Mode and Setup
Mode.
• Select to display Run Home (Screen 1). Enter-
ing an incorrect password also displays Run Home
(Screen 1).
Setup Home (Screen 17)
Setup Home (Screen 17) displays if is selected on
any screen and the system is not locked, or when a cor-
rect password is entered on Password (Screen 16). The
Setup Home screen displays the software versions of
the boards in the Display Module, Advanced Fluid Con-
trol Module, and the USB Module (if applicable).
• Press a soft key button to select one of the four
Setup Mode screen sections:
Configure , Recipe , Maintenance , or
Calibration .
• Press to toggle between Run Mode and Setup
Mode.
Configure 1-4 (Screens 18-21)
Configure 1 (Screen 18) displays if is selected on
Setup Home (Screen 17). This screen allows users to
set up the system type (pump or meter), the type of dos-
ing (sequential or dynamic), number of guns (1 or 2),
and the system color configuration (1 or 3).
NOTE: If 1 gun is selected, users can enable a gun flush
box (=yes; X=no). The gun flush box option is avail-
able only for 1-gun systems.
NOTE: If your application requires only 2 colors, the
system is still configured for 3 colors. Select 3 from the
dropdown menu.
Dynamic vs. Sequential Dosing: See page 51 and fol-
lowing for a description of each type of dosing, to help
you select the best option for your system. The options
are:
• A-B 50cc
(Select for sequential dosing, 50cc dose size.)
• A-B 100cc
(Select for sequential dosing, 100cc dose size.)
• A B
(Select for dynamic dosing.)
FIG. 36. Password (Screen 16)
FIG. 37. Setup Home (Screen 17)
Recipe SettingsConfigure Calibration
Software Version:
Display Module
Fluid Control Module
USB Module