Filter
Top Products
HP NetRAID-4M Cluster Services Installation Guide Hardware, Drivers and Utilities
14
17. From the General tab screen, de-select all components from the middle panel other than
Internet Protocol (TCP/IP).
NOTE Microsoft recommends not installing the components: Client for Microsoft
Networks, or File and Print Sharing for Microsoft Networks on the intra-cluster
LAN.
18. Click on the Internet Protocol (TCP/IP) component and then click the Properties
button.
19. Select the option to Use the following IP Address:.
20. Enter a private IP address. For example:
Server A: 10.1.1.1
Server B: 10.1.1.2
Subnet Mask: 255.0.0.0
DNS Server: Leave blank
NOTE The client LAN IP and heartbeat LAN IP addresses must be on different subnets.
The heartbeat LAN IP addresses on each node must be on the same subnet, and the
client LAN IP’s on each node must be on the same subnet.
21. Click the Advanced button.
22. Click the DNS tab. De-select the Register this connection’s addresses in DNS and the
Use this connection’s DNS suffix in DNS registration option will become unavailable
(gray out).
23. Click the Wins tab and select the Disable NetBIOS over IP option and then click OK.