Filter
Top Products
HP NetRAID-4M Cluster Services Installation Guide Creating Shared Disksets
38
4.2 Create NetRAID-4M Diskset Resources for Data Drives
1. From either server, open the Cluster Administrator utility
2. In the left panel click once on the Groups folder.
3. In the right panel, right-click on the Cluster Group.
4. Select the New option then click on Resource.
5. Enter the new shared data drive name, (e.g.: Shared_S)
and then enter a description. (Example: Shared Data Drive S:)
6. From the Resource Type drop list select NETRaid4M Diskset.
7. For the Group name select Cluster Group and click Next.
8. Change or confirm settings in the Possible Owners screen and then click Next.
9. Make no changes in the Dependencies windows and click Next.
10. Select the new data drive in the top box and then click Finish.
13. Click OK to the success dialog box.
14. Right-click on the resource that is in an offline state. Select the Bring online option.
15. Create NETRaid4M Diskset resources for each new shared disk.
NOTE Please refer to the HP NetRAID 4M FAST Users Guide, listed in the
Recommended Reading section of this document, for instructions on configuring
the myriad of cluster specific features available with the HP NetRAID-4M
controller and NetRAID-4M Disksets.