Filter
Top Products
HP NetRAID-4M Cluster Services Installation Guide Cluster Software Components and Quorum
33
17. From the Quorum Resource drop list, select the shared Quorumname item (the example is
Cluster1) and then click OK.
18. Click once on the Cluster Group in the left panel.
Remove the Local Quorum Resource
19. Right-click on the Local Quorum resource in the right panel and then select Take Off-
line.
20. After the Local Quorum shows Off-line status, right-click the Local Quorum resource and
select the Delete option. Click Yes to confirm the deletion.
21. The Cluster Group should now appear as shown:
3.6 Test the Shared Quorum Failover
1. In the Cluster Administrator left panel, click once on the Cluster Group and observe the
current ownership of the individual resources.
NOTE If not familiar with the default properties of the Cluster Group, right click the
Cluster group and select Properties now. Note that by default, for example,
Prevent Failback is checked. Properties extend to all resources within the group.
Also, do not change the possible owners list of any resources within a group,
without understanding that if any resource cannot failover in the group if the
surviving node is not in its list of possible owners, then the group cannot fail over.
2. Right-click the Cluster Group object in the left panel and select the Move Group option.