Filter
Top Products
HP NetRAID-4M Cluster Services Installation Guide Hardware, Drivers and Utilities
15
24. Click Yes to acknowledge the empty WINS address message, and the click OK in the
Properties window.
25. Click OK to acknowledge the empty DNS list message. Click OK at the Properties
window.
26. Close the Network & Dial-up Connections windows.
Install the HP NetRAID-4M FAST Utility
27. Insert the first HP NetRAID-4M FAST Utility installation diskette in the floppy drive.
28. Navigate to the A:\ directory and double-click on setup.exe.
Or
If the HP NetServer Navigator CD-ROM is used, go to path:
NSNavigator\periph\nraidadp\nt\us\setup.exe
29. After clicking Next at the Welcome screen, fill out the name and company screen and
click Next. Choose a path for the new folder and click Next, and Next again to accept the
path.
30. Select the option to perform a Full Install. Accept all defaults of the installation program.
31. When prompted to restart the computer, remove the floppy diskette from the floppy drive,
select Yes and then click Finish.
32. Power on Server B, allowing Server B to boot to Windows 2000 Advanced Server.
33. Log onto Server B.
34. Repeat the previous steps 1 through 32 on Server B to install the HP NetRAID-4M Disk
Array Controller driver and FAST utility and configure the IP addressing for the heartbeat
LAN Adapter (D5013B).
35. Restart Server B.