Filter
Top Products
VII. Trapeze Wires
1. Lead the trapeze shock cord (part no. 29)
through the grommet on the forward out-
board side of the trampoline, then under
the trampoline and through the opposite
grommet.
2. Clear the trapeze handles so they lead to
the outside of the shrouds. Then tie the 3-
foot length of quarter-inch line (part no. 30)
to the dogbone or the J and H handle
(optional) with a bowline knot. After the
line is led through the thimble on the end
of the trapeze wire, attach the rope lock
(part no. 32). Now tie the end of the line to
the shock cord with another bowline knot.
(The complete assembly is shown in Fig.
29.)
Fig. 29
~
r
-17-