Humminbird 4087301 Marine GPS System User Manual


 
Installing the Portable Case on the Boat
Since the portable case has a large non-skid mounting surface, it may be
attached to almost any surface.
In this section, you will route the cables on the boat, connect the transducer
and power cables to the portable case, and attach the portable case to a dry
and convenient location on your boat.
1. Connect the Transducer and Power Cables to the Portable Case
1. Make sure the large opening in the front of the portable case is
unzipped; you may want to roll up the flap and secure it with the
provided strap and clip while you’re working.
2. Plug the transducer cable into the jumper port in the portable case to
the left of the control head, as you face the front of the bag (see the
illustration Plugging in the Transducer).
Plugging inthe Transducer
30
Installing the Portable Case on the Boat