Filter
Top Products
View
Settings: Sonar, Track (PiranhaMAX 176i and 196ci only), Status;
Default = Sonar
View selects a view to be displayed on the screen.
Depth Range
Settings: Auto, 15 ft - 600 ft, 5 m - 184 m (International Models
only); Default = Auto
Depth Range sets the deepest depth range that will be displayed by the unit.
Auto: When in automatic, the lower range willbe adjusted by the unit to follow
the bottom.
Manual: You can adjust the Depth Range to lock the unit on a particular depth.
NOTE: In manual operation, if the depth is greater than the depth range setting, the
bottom will not be visible on the display. Select AUTO to return to automatic operation.
Sensitivity
Settings: 0 - 10; Default = 5, Setting Saved in Memory
Sensitivity controls how much detail is shown on the display.
Increasing the sensitivity shows more sonar returns from small baitfish and
suspended debris in the water; however, the display may become too
cluttered. When operating in very clear water or greater depths, increased
sensitivity shows weaker returns that may be of interest.
Decreasing the sensitivity eliminates the clutter from the display that is
sometimes present in murky or muddy water. If Sensitivity is adjusted too low,
the display may not show many sonar returns that could be fish.
53
Sonar Menu