Icom MR-1000RTM Fish Finder User Manual


 
15
5
DISTANCE AND DIRECTION MEASUREMENTS
Bearing and Distance measurement
This radar has 2 Electronic Bearing Lines (EBL) to in-
dicate the target direction from your ship or a target.
DUsing the EBL and VRM
q Push [Ù Ú Ω≈] to move the cursor on the desired
target.
w Push [EBL1 (VRM1)]/[ ] to display the
EBL1 and VRM1.
Push [Ω ≈] to rotate the electronic bearing line.
Push [] to rotate clockwise and push [] to rotate
counterclockwise.
Push [Ù Ú] to increase or decrease the variable range
marker ring size.
The EBL1 and VRM1 readouts indicate the target bear-
ing and distance.
The EBL readouts indicate the target bearing;
0 to 360°R : Relative direction, when 360°R is se-
lected in the EBL/PI of the FUNCTION
menu. (see p. 6)
P/S 0 to 180° : Bow direction, when PT/SBis selected
in the EBL/PI of the FUNCTION menu.
(see p. 6)
0 to 360°T* : True or magnetic bearing, when select-
ing TRUE in the EBL/PI of the FUNC-
TION menu. (see p. 6)
*Bearing data is required. (p. 39)
e Push [EBL1 (VRM1)]/[ ] to clear the
EBL1 and VRM1.
Cursor remains on the display.
r Push [Ù Ú Ω ≈] to move the cursor on the desired
target.
t Push [EBL2 (VRM2)]/[ ] to display the
EBL2 and VRM2 on the display.
When the EBL1 and VRM1 are displayed, the beginning
of EBL2 and VRM2 appears at the intersection point of
the EBL1 and VRM1.
The EBL2 and VRM2 disappears when [EBL1 (VRM1)]
/[ ]is pushed.
y To clear the EBL1 and VRM1, push [EBL1 (VRM1)]
/[ ].
3/4
TVECT
3M
1141NMNM
CURS
SOG 00
km/h
H UP
3240
R
HDG
IR
EBL1 3151
˚T
EBL2 2471
˚T
WPT 34
VRM1 0503NM
VRM2 0359NM
POSN
EBL1
VRM1
EBL2
EBL1
readout
EBL2
readout
VRM2
VRM1 readout
VRM2 readout
MR-1000R2_T2.qxd 04.2.24 10:22 Page 15