Filter
Top Products
Evaluation Board for Quad T1/E1 Applications — LXD386
Developer Manual 15
4.5 Evaluation Board Software
When operating the evaluation board in the software mode, the software provided with the kit will
be used to configure the LXT386 and to monitor its operation. This software provides a point-and-
click, user friendly interface with on-line help screens. Refer to the data sheet for detailed
information about the LXT386 transceiver.
4.6 Software Installation and Start-Up
The minimum PC system requirements are:
• IBM compatible PC
• 386/40 MHz CPU (Pentium class recommended)
• Available serial port
• Mouse
• VGA monitor
• DOS version 5.0 or higher and Microsoft Windows 3.1 (Windows 9x recommended)
Begin the installation procedure by running the Setup.exe file on the installation diskette #1.
Follow the on-screen prompts to complete the software installation.
4.7 Hardware Set-up Screen
Whenever the LXT386 software is run, the Hardware Set-up screen will appear first on the monitor
(see Figure 6). This screen is used to select the PC serial port to be used. Select an available serial
port and click the OK button.
4.8 Quitting the Program
The program can be terminated at any time by clicking the “Exit” control button, located at the
right side of the screen.