Kenwood TH-D7E Marine Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
15
?! .,–/&#
()<>;:"@
KEYPAD DIRECT ENTRY
The keypad allows you to make various entries
depending on which mode the transceiver is in.
In VFO or Memory Recall mode, use the keypad to
select a frequency {page 45} or memory channel number
{page 28}. Press [ENT] first.
In Menu mode, use the keypad to select a menu item.
For example, pressing [1], [4], [1] in sequence selects
Menu 1–4–1 (DATA BAND).
To manually send a DTMF number, press and hold the
PTT switch, then press the keys on the keypad
{page 41}.
You can also use the keypad to program a memory
channel name {pages 29 and 42}, Power-ON message
{page 50}, or other character strings. For example, each
press of [TNC] switches entry as A, B, C, a, b, c, then 2.
Press [DUAL] to switch 0 and space. Press [ENT] to
switch among the special ASCII characters.
The selectable special characters are listed below:
Note: Pressing [UP]/ [DWN] allows you to select more special ASCII
characters than above.
TH-D7 E 10 Getting Acquainted 98.12.4, 0:10 PM15