Kenwood TH-D7E Marine Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
23
AUTOMATIC REPEATER OFFSET
This function automatically selects an offset direction,
according to the frequency that you select on the VHF
band. The transceiver is programmed for offset direction
as shown below. To obtain an up-to-date band plan for
repeater offset direction, contact your national Amateur
Radio association.
U.S.A. and Canada versions
This complies with the standard ARRL band plan.
European versions
Note: Automatic Repeater Offset does not function when Reverse is ON.
However, pressing [REV] after Automatic Repeater Offset has selected
an offset (split) status, exchanges the receive and transmit frequencies.
1 Press [MENU] to enter Menu mode.
2 Press [1], [5], [1] to select “1–5–1 (AUTO OFFSET)”.
3 Press [UP]/ [DWN] to switch the function ON
(default) or OFF.
4 Press [OK] to complete the setting.
5 Press [MENU] to exit Menu mode.
+
+
S
S
SS
144.0 145.5 146.4 147.0 147.6
145.1 146.0 146.6 147.4 148.0 MHz
S: Simplex
S
S
S: Simplex
144.0
146.0 MHz145.8145.6
TH-D7 E 20 Operating through. 98.12.4, 0:11 PM23