Kenwood TH-D7E Marine Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
MEMORY CHANNELS
In memory channels, you can store frequencies and
related data that you often use. Then you need not
reprogram those data every time. You can quickly recall
a programmed channel by simple operation. A total of
200 memory channels are available for bands A and B.
SIMPLEX & REPEATER OR ODD-SPLIT MEMORY
CHANNEL?
You can use each memory channel as a simplex &
repeater channel or odd-split channel. Store only one
frequency to use as a simplex & repeater channel or two
separate frequencies to use as an odd-split channel.
Select either application for each channel depending on
the operations you have in mind.
Simplex & repeater channel allows:
Simplex frequency operation
Repeater operation with a standard offset
(If an offset direction is stored)
Odd-split channel allows:
Repeater operation with a non-standard offset
Note:
Not only can you store data in memory channels, but you can also
overwrite existing data with new data.
If you have recalled a memory channel on the non-current band
(A or B), you cannot select the same channel on the current band to
program data.
retemaraP
&xelpmiS
retaepeR
tilps-ddO
ycneuqerfevieceR
seY
seY
ycneuqerftimsnarTseY
ycneuqerfenoTseYseY
NOenoTseYseY
ycneuqerfSSCTCseYseY
NOSSCTCseYseY
noitceridtesffOseYA/N
ycneuqerftesffOseYA/N
NOesreveRseYA/N
ezispetsycneuqerFseYseY
tuokcollennahcyromeMseYseY
emanlennahcyromeMseYseY
noitcelesedomMF/MA
)ylnoA7D-HT(
seYseY
The data listed below can be stored in each memory
channel:
Yes: Can be stored in memory.
N/A: Cannot be stored in memory.
TH-D7 E 26 Memory Channels 98.12.4, 0:11 PM26