Kenwood TH-D7E Marine Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
43
This transceiver allows you to switch the DTMF
number transmission speed between Fast (default)
and Slow. If a repeater cannot respond to the fast
speed, access Menu 1–3–2 (TX SPEED) and select
“Slow”.
You can also change pause duration stored in
memory channels; the default is 500 msec. Access
Menu 1–3–4 (PAUSE). The selectable pauses are
100, 250, 500, 750, 1000, 1500, and 2000 msec.
Transmitting a Stored DTMF Number
1 Press [PTT]+[MENU].
2 Release only [MENU], then press [UP]/ [DWN] to
select the desired DTMF memory channel.
3 While still holding [PTT], press [MENU] again.
The number stored in the channel scrolls across the
display accompanied by DTMF tones from the
speaker.
After transmission, the frequency display is restored.
If you need not confirm the memory channel
contents, press [0] to [9] instead of [UP]/ [DWN] in
step 2 to select a channel number. The stored DTMF
number will be immediately transmitted. You need
not press [MENU] in step 3.
STA
CON
PACKET
96
BCON
DUP
9
7
5
TH-D7 E 41 DTMF Functions 98.12.4, 0:12 PM43