Sharp PW-E420 Marine Radio User Manual


  Open as PDF
of 56
 
5
Using the PW-E420 for the first time
BesuretoperformthefollowingoperationsbeforeusingthePW-E420fortherst
time.
1. Set the battery replacement switch on the bottom
oftheunittothe‘REPLACEBATTERY’position.
2. Remove the battery cover.
3.Inserttheonebattery.Makesurethebattery
polarity is correct.
4. Replace the battery cover.
5. Set the battery replacement switch to the
‘NORMALOPERATION’position.
6. Open the unit and press
o
to turn the
power on.
TheLCDcontrastscreenwillappear.
•Shouldadifferentscreenappear,followthe
reset procedure on page 44.
•Ifthepowercannotbeturnedon:
•Makesurethebatteryreplacementswitchisplacedatthe
‘NORMALOPERATION’position,thenpress
o
again.
•Ifthepowerstillcannotbeswitchedon,tryfollowingsteps1through6inthe
above procedure again.
7.AdjusttheLCDcontrastbyusing
[ ]
, and
press
e
.
The main menu screen will appear.
•TheLCDcontrastsettingcanbeadjusted
laterintheSet-upmenu(Menü-Einstellun-
gen).
Getting Started
 previous next