Filter
Top Products
Page 46 GPS Chart 150C
3.14 TECHNICAL
3.14.0System Test
If you have connected your chart plotter according to the instructions, and chosen the
proper menu selection for your device, and are still having problems with your chart
plotter, the extended auto-test should help determine the problem. Make sure the
chart plotter is turned Off. While pressing and holding any other key, turn the chart
plotter On. A new menu will appear on the display:
Figure 3.14.0 - System Test
Use the ShuttlePoint knob to select the desired test. Choose the test press “ENTER”.
To exit from any submenu press “CLEAR”. To exit from the System Test turn Off the
chart plotter.
3.14.0.0RAM Menu
This test verifies the integrity of the memories and if desired during this test all the
internal memory can be erased and the default setting restored.
Figure 3.14.0.0 - RAM Menu
RAM Test
To verify the integrity of the RAM. If on the screen the message ERROR appears, the
RAM is physically damaged. Contact your Dealer or STANDARD HORIZON.
RAM Clear
To clear internal memory. If the chart plotter exhibits unusual operations, or appears
to be malfunctioning, it may be possible to correct the problem by clearing RAM.