Filter
Top Products
6-2
A+ SERVER 2022G-URF User's Manual
Figure 6-1. Front and Rear Chassis Views
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system status indications. A
ribbon cable has bundled these wires together to simplify the connection. Connect
the cable from JF1 on the serverboard to the Control Panel PCB (printed circuit
board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess
cabling out of the airow path. The LEDs inform you of system status.
See Chapter 3 for details on the LEDs and the control panel buttons. Details on
JF1 can be found in Chapter 5.
System Reset
Control Panel
Main Power
Slim DVD-ROM Drive
3.5" Drive Bays (2)
SAS/SATA Drives (8)
Ethernet Ports
USB Ports
Keyboard/Mouse Ports
COM1 Port
4 Standard Size PCI SlotsIPMI LAN
VGA Port
USB Ports (2) COM Port