Filter
Top Products
User’s Manual 6-13
Additional memory module
Please also refer to Chapter 3, Operating Basics, for further information on
installing and removing memory modules.
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
The "USB Wakeup
function" does not
work.
When Sleep and Charge function is enabled, the
"USB WakeUp" function does not work for ports that
support the Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function-compatible
icon ( ) or change to disable Sleep and Charge
function.
Problem Procedure
Problem Procedure
If there is a memory
malfunction, the
Power indicator will
repeatedly flash (on
for 0.5 seconds, off
for 0.5 seconds) in
the following
patterns;
If there is an error in
only Slot A: amber
twice, then white
once.
If there is an error in
only Slot B: amber
once, then white
twice.
If there are errors in
both Slot A and Slot
B: amber twice, then
white twice.
In the event the Power indicator flashes when the
computer is turned on, you should first check that
the installed memory module(s) are compatible with
the computer. If there is an error with a compatible
memory module, there is a possibility the memory
module is damaged.
If you determine that an incompatible module has
been installed, you should follow the steps as
detailed below:
Turn off the computer.
1. Disconnect the AC adaptor and all peripheral
devices.
2. Remove the battery pack.
3. Remove the incompatible memory module.
4. Install the battery and/or connect the AC
adaptor.
5. Turn on the computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.