Filter
Top Products
User’s Manual 3-38
7. Push the latches away from the module in order to release it - a spring
will force one end of the module up at an angle.
8. Grasp the module by its edges and remove it from the computer.
Figure 3-12 Removing the memory module
9. Seat the memory module cover in place and secure it with the screw(s).
10. Install the battery pack.
11. Turn your computer over.
■ If you use the computer for a long time, the memory modules and the
circuits locating close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
■ Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
1. Latches
1
1
Take care to ensure that the memory module cover is firmly closed.