Filter
Top Products
User’s Manual 3-17
■ Do not operate Corel Digital Studio immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■ CD recorder, DVD-Audio, Video CD functions are not supported in this
version.
■ Do not run software like a screen saver because it can put a heavy load
on the CPU.
■ Do not support mp3 decode and encode.
■ DVD-VR format is not supported in this version.
Before recording the video to DVD or Blu-ray disc
■ When you record DVD disc or Blu-ray disc, please use only discs
recommended by the Drive manufacturer.
■ Do not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD or Blu-ray disc.
■ Do not perform any of the following actions:
Operate the computer for any other function, including using a mouse
or Touch Pad, or closing/opening the display panel.
Bump or cause vibration to the computer.
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
Open the DVD/BD drive.
Install, remove or connect external devices, including the following:
memory media card, USB device, external display, optical digital
devices.
■ Please verify your disc after recording important data.
■ Not support to output VCD and SVCD format.
■ Force eject disc.
About recorded DVDs and Blu-ray discs
■ Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
■ When playing your recorded DVD on your computer, please use the
TOSHIBA VIDEO PLAYER software application.
■ When playing your recorded Blu-ray Disc on your computer, please use
the WinDVD BD for TOSHIBA software application.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
TOSHIBA VIDEO PLAYER
Please be aware of the following limitations when you use the TOSHIBA
VIDEO PLAYER: