Filter
Top Products
Features and functions
31
To install the front seat:
(1) Insert the projections on the front of the
seat into the stays on the deck, and then
push the rear of the seat down to lock it in
place.
(2) Install the rear seat.
NOTE:
Make sure that the seats are securely in-
stalled before operating the watercraft.
EJU36681
Hood
To open the hood, pull the visor up, and then
lift up the hood.
To close the hood, push down on the center
of the hood until it latches securely.
NOTE:
Make sure that the hood is securely closed
before operating the watercraft.
EJU36690
Fuel tank filler cap
The fuel tank filler cap is located under the
hood.
To remove the fuel tank filler cap, open the
hood, and then turn the cap counterclockwise.
1 Visor
1
UF1W10E0.book Page 31 Monday, November 26, 2007 3:57 PM