Filter
Top Products
Features and functions
41
erate properly, contact a Yamaha dealer.
(See page 32 for operation of the remote con-
trol transmitter.)
EJU36770
Yamaha Security System settings
The Yamaha Security System settings are se-
lected by pressing the lock or unlock button
on the remote control transmitter briefly.
Depending on the selected Yamaha Security
System setting, the “UNLOCK” indicator light
will come on or go off.
NOTE:
The lock and unlock modes of this system can
only be selected while the engine is stopped.
LOCK
When the lock button on the remote control
transmitter is pressed briefly, the beeper
sounds once and the “UNLOCK” indicator
light goes off. This indicates the lock mode is
selected and the engine cannot be started.
UNLOCK
When the unlock button on the remote control
transmitter is pressed briefly, the beeper
sounds two or three times and the “UNLOCK”
indicator light comes on. This indicates the
1 Remote control transmitter
1 Lock button
2 Unlock button
1 “UNLOCK” indicator light
UF1W10E0.book Page 41 Monday, November 26, 2007 3:57 PM