Filter
Top Products
Features and functions
37
● Use reverse for slow-speed maneuver-
ing only.
● Make sure that there are no obstacles or
people behind you before shifting into
reverse.
● Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
NOTE:
This model is equipped with a function which
limits the engine speed in reverse.
To shift into forward:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Push the shift lever away from you until it
stops.
EJU31311
Quick Shift Trim System (QSTS)
selector
The QSTS selector is located at the left han-
dlebar grip and is used to adjust the trim angle
of the watercraft.
Operating the QSTS selector changes the an-
gle of the jet thrust nozzle vertically. This
changes the trim angle of the watercraft.
1 Quick Shift Trim System (QSTS) selector
2 QSTS selector lock lever
UF1W10E0.book Page 37 Monday, November 26, 2007 3:57 PM