Filter
Top Products
Operation
68
turned, and that there is no free play between
the handlebars and the jet thrust nozzle.
Check that the handlebars are locked in
place. (See “Tilt lever” on page 36 for more in-
formation.)
EJU36580
Shift lever and reverse gate
Check the shift lever and reverse gate for
proper operation.
Make sure that the reverse gate goes down
completely when the shift lever is pulled up.
Also, make sure that the reverse gate goes up
completely when the shift lever is pushed
down.
WARNING
EWJ00030
● Make sure that the throttle lever is com-
pletely released and that the engine is at
idle before shifting into reverse.
● Do not use the reverse function to slow
down or stop the watercraft as it could
cause you to lose control, be ejected, or
impact the handlebars.
● Use reverse for slow-speed maneuver-
ing only.
● Make sure that there are no obstacles or
people behind you before shifting into
reverse.
● Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
UF1W10E0.book Page 68 Monday, November 26, 2007 3:57 PM