5: Commands and Levels
Note that quotes must enclose the value if it contains spaces.
show connection statistics
Selects the RSA/DSA certificates by name for the SSL client.
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep alive
timeout.
Exits to the next higher level.
Removes the remote host address used to establish tunneling
connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection.
Removes the remote port used to establish tunnel connections.
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode tunnel-
ing.
Uses Telnet protocol (with IAC) for connect mode tunneling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode tunnel-
ing.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI
session.
show connection statistics
Sets the SSH user name for use when establishing tunneling
connections
with other devices.
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and sets the
timer.
<milliseconds> = timer value, in milliseconds.
validate certificate disable
Skips verification of the server certificate when connecting.
validate certificate enable
Requires verification of the server certificate when connecting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Stores the current configuration in permanent memory.
host 8 (config-host:8) level commands
PremierWave EN Command Reference 171
