5: Commands and Levels
Exits to the enable level.
Return a lookup on the DNS name or IP address.
Displays the last 20 commands entered during the current CLI
session.
Stores the current configuration in permanent memory.
edit 1 (config-profile-basic:default_adhoc_profile) level commands
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Sets the radio channel for AdHoc.
<number> = number of the radio channel.
Restores the default value to the radio channel.
Restores the default topology, which is Infrastructure.
Exit to the profiles level
scan 2.4 ghz band disable
Disables scanning of the 2.4 GHz band for this profile.
Enables scanning of the 2.4 GHz band for this profile.
Disables scanning of the 5 GHz band for this profile.
Enables scanning of the 5 GHz band for this profile.
scan dfs channels disable
Disables scanning of the DFS channels (5 GHz band) for this pro-
file.
Enables scanning of the DFS channels (5 GHz band) for this pro-
file.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Sets topology to Infrastructure.
Stores the current configuration in permanent memory.
edit 2 (config-profile-basic:test1) level commands
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Sets the radio channel for AdHoc.
<number> = number of the radio channel.
Restores the default value to the radio channel.
Restores the default topology, which is Infrastructure.
Exit to the profiles level
PremierWave EN Command Reference 76
