A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
<group> = the name for the new group.
delete <cp> from <group>
Removes a CP from a specified group and sets the CP to its de-
fault
configuration of input.
<cp> = configurable pin.
<group> = the name of the group.
delete <group>
Removes a group and resets all CPs in that group to the default
configuration of input.
<group> = the name of the group.
disable <group>
Disables the specified group.
<group> = the name of the group.
enable <group>
Enables a disabled group.
<group> = the name of the group.
exit
Exits to the enable level.
get <group>
Displays the value of the specified group.
<group> = the name of the group.
set <cp> as input
Configures a CP as an asserted high input.
<cp> = configurable pin.
set <cp> as input assert low
Configures a CP as an asserted low input.
<cp> = configurable pin.
set <cp> as output
Configures a CP as an asserted high output.
<cp> = configurable pin.
set <cp> as output assert low
Configures a CP as an asserted low output.
<cp> = configurable pin.
set <group> <value>
Assigns a value to the specified group.
<group> = the name of the group.
<value> = numeric value to assign to the CP group. Can be speci-
fied as hex
if prepended with “0x”.
show <group>
Displays group information for specified group.
<group> = the name of the group.
show cp
Displays configuration and group information for all CPs.
show groups
Displays all groups defined and their state.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
credentials (ssl-credentials) level commands
clrscrn
Clears the screen.
create <credential name>
Create a new credential name
delete <credential name>
Delete existing credential by name
edit <credential name>
View or edit an existing profile
exit
Exits to the ssl level.
show
Show existing credential names
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
device (device) level commands
auto show tlog
Continuously displays the internal trouble log.
clrscrn
Clears the screen.
exit
Exit to the enable level.
PremierWave EN Command Reference 73