5: Commands and Levels
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Stores the current configuration in permanent memory.
key 3 (config-profile-security-wep-key:test1:3) level commands
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Exits to the next higher level.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Stores the current configuration in permanent memory.
key 3 (config-profile-security-wep-key:default_adhoc_profile:3) level commands
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Exits to the next higher level.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI
session.
Stores the current configuration in permanent memory.
PremierWave EN Command Reference 182
