A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
host generate dsa 768
Generate DSA public and private keys
host generate rsa 1024
Generate RSA public and private keys
host generate rsa 512
Generate RSA public and private keys
host generate rsa 768
Generate RSA public and private keys
host keys
Sets RSA or DSA public and/or private keys
no host dsa
Removes DSA public and private keys
no host rsa
Removes RSA public and private keys
show
Show SSH Server settings
show authorized user <username>
Show information for an authorized user
show history
Displays the last 20 commands entered during the current CLI
session.
show host dsa
Show full DSA public key
show host rsa
Show full RSA public key
write
Stores the current configuration in permanent memory.
smtp (config-smtp) level commands
clrscrn
Clears the screen.
default relay port
Restores the SMTP relay port to its default.
exit
Exits to the configuration level.
no relay address
Removes the SMTP relay address.
relay address <text>
Sets an SMTP relay address to direct all outbound email messag-
es through
a mail server.
relay port <number>
Sets the SMTP relay port.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
ssh (ssh) level commands
client
Enters the SSH Client configuration level.
clrscrn
Clears the screen.
exit
Exits to the enable level.
server
Enters the SSH Server configuration level.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
ssh (config-cli-ssh) level commands
clrscrn
Clears the screen.
default max sessions
Restores the default maximum allowed concurrent incoming SSH
sessions.
default port
Restores the default local port to the SSH server.
exit
Exits to the CLI level.
max sessions <number>
Sets the maximum allowed concurrent incoming SSH sessions.
<number> = number of sessions.
port <number>
Sets the local port that the SSH server uses.
<number> = local port number.
show
Displays the current configuration.
PremierWave EN Command Reference 200