3
Printing Basics
3-28
Phaser 350 Color Printer
Color corrections
The printer provides TekColor Dynamic Correction software, which consists
of the following color correction modes:
Vivid Color, the default color correction mode, is generally recommended
for typical office printing.
You can view an approximate sample output of some color corrections at the
bottom of the printer’s startup page. Refer to “Startup Page” on page 7-6 for
more information.
Note
If your printer is networked and you have changed the front panel
settings, make sure that you tell other users on the network.
Printer settings affect all prints made with non-supported
drivers.
Color correction mode Description
None No correction made to colors.
Vivid Color Default setting. Produces the brightest possible colors.
Display Adjusts color to closely approximate the colors on a
standard display screen.
SWOP Press Specification for Web Offset Publications. Typically used
to match U.S. press standards.
Euroscale Press Used to match equivalent 3M Matchprint
®
proofs.
Commercial Press Used to match commercial 3M Matchprint
®
proofs.
Monochrome Prints a color image as a monochrome gray scale.
Outputs color page masters in black-and-white for
photocopying.
Use Printer Setting Uses the color correction mode specified in the printer’s
front panel setting rather than any printer driver setting.
