5
Caring for Your Printer
5-40
Phaser 350 Color Printer
Locking the transit restraint
Refer to the following illustration while performing these steps.
1.
When the printer displays the Ready message or the printer’s
name, power it down using the rear-panel On/Off switch. The
printer places the print head in the locking position.
Caution
To avoid damaging the printer’s internal components, always
turn the printer power off and lock the transit restraint before
moving the printer. Failure to do so may result in damage to
the printers’ internal components and may invalidate your
printer’s warranty.
2.
Locate the transit restraint on the right side of the printer and
insert a wide flat-blade screwdriver into the transit restraint slot.
3.
While pressing inward with medium pressure, turn the transit
restraint slot in a clockwise direction to lock the printhead in
position. The lock button is recessed from the side of the printer
when fully engaged.
1
1-
1
2
3
