Getting Set Up
2
User Manual
2-55
Setting up the Adobe PSPrinter Driver
The Adobe PSPrinter driver uses printer-specific PPDs (PostScript Printer
Description files) for information on a printer’s page sizes, printing options,
and media type options. To use the Adobe PSPrinter driver with a
Phaser 350 printer, do the following steps. If the printer is busy, it may take
some time to complete this set-up procedure; you may want to do this
procedure when the printer is idle. You only have to set up a printer once.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM for more detailed information on the
Adobe PSPrinter driver.
1.
Install the printer’s software as described on page 2-53. Select
Easy Install to automatically install all of the necessary software,
or select Adobe PSPrinter Driver and Printer Descriptions in the
Custom Install window.
2.
Open the Chooser.
3.
Select the PSPrinter driver icon.
4.
Click on the Zone your printer is in. See your network
administrator if you have questions.
5.
Select your printer from the list.
6.
Still in the Chooser, click the Setup button to see a list of options.
7.
The correct PPD file should be selected automatically.
If the PPD file is not automatically selected, a dialog box opens
showing the location of the PPD files you have installed in the
Printer Descriptions folder, in the Extensions folder, inside your
System Folder. Click one of the following PPDs and click Select:
■ Use TK350171.PPD with the standard version of the printer.
■ Use TK350691.PPD with the printer’s Extended Features option.
