Printing Basics
3
User Manual
3-11
Using the Windows NT 4.0 PostScript driver
If you are using Microsoft Windows NT 4.0, first follow the instructions in
Chapter 2 to set up a printer driver for a Phaser 350 printer. Then, select
TekColor color corrections and other printer features from the Windows NT
driver.
Selecting printer options within an application: Print
1.
Select Print from the File menu; the Print dialog box appears.
You can select a different printer and other settings in this
dialog box.
2.
Click on the Properties button; the Printer Document Properties
sheet appears.
3.
Click the Advanced tab to change any printer features, including
TekColor color corrections. This tab displays the same
information as the Document Defaults Properties Advanced tab.
4.
Click the Page Setup tab to see other features. This tab displays
the same information as the Document Defaults Properties Page
Setup tab.
Note
Changes to any of these settings overrides the Default Printer
Properties settings in the Printers folder.
