Printing Basics
3
User Manual
3-45
Using fonts with Windows
Before printing, you need to make sure the fonts specified in your document
are installed in the printer or are set up correctly in Windows. If you request
a font in an application that is not resident in the printer, or is not correctly
installed in Windows, the text is printed in the Courier typeface. Or, to use
fonts that are not resident in the printer, do one of the following:
■ Use a font downloader supplied with your font package to
download the desired font to the printer.
■ Edit your WIN.INI file so the Windows driver automatically
downloads the fonts you need as part of a print job. Refer to your
Microsoft Windows documentation for details on this procedure.
Some font packages automatically update the PostScript port
entries in your WIN.INI file when you reinstall the fonts. Refer to
the font package’s documentation for instructions.
For more information on using fonts with Windows, request a document
catalog from HAL or EuroHAL, the Tektronix automated fax systems. Refer
to “Using the automated fax systems” on page 6-2 for instructions on using
these systems.
Printing font samplers
Printing a font sampler from a Macintosh
You can print a sample of the printer’s resident fonts by downloading the
Fonts Sampler utility file to the printer.
Note
If you are using QuickDraw GX and System 7.5, you can print
the fonts sampler from the Tektronix Phaser 350 GX printer
driver.
1.
Install the sampler and utility files from either the Printer
Software for Macintosh diskette or the printer’s CD-ROM; see
Chapter 2 for details.
2.
Select the appropriate printer in the Chooser.
