A SERVICE OF

logo

Chapter 35 DHCP
GS2210 Series User’s Guide
291
Figure 209 DHCP Relay Configuration Example
35.5 Configuring DHCPv4 VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients.
Click IP Application > DHCP > DHCPv4 in the navigation panel, then click the VLAN link In the
DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See Section 5.2 on page 42 for
information on how to do this.
EXAMPLE