Filter
Top Products
Chapter 6: Secure SSH Tunneling and SDT Connector
724-746-5500 | blackbox.com
59
Figure 6-29. IP address of console server unit.
To establish the VNC connection, simply activate the VNC Viewer software on the Viewer PC and enter the password.
Figure 6-30. VNC authentication.
NOTE: For general background reading on Remote Desktop and VNC access we recommend the following:
The Microsoft Remote Desktop How-To.
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
The Illustrated Network Remote Desktop help page.
http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html
What is Remote Desktop in Windows XP and Windows Server 2003? by Daniel Petri. http://www.petri.co.il/what's_remote_desktop.htm
Frequently Asked Questions about Remote Desktop. http://www.microsoft.com/windowsxp/using/mobility/rdfaq.mspx
Secure remote access of a home network using SSH, Remote Desktop, and VNC for the home user
http://theillustratednetwork.mvps.org/RemoteDesktop/SSH-RDP-VNC/RemoteDesktopVNCandSSH.html
Taking your desktop virtual with VNC, Red Hat magazine. http://www.redhat.com/magazine/006apr05/features/vnc/ and
http://www.redhat.com/magazine/007may05/features/vnc/
Wikipedia general background on VNC http://en.wikipedia.org/wiki/VNC.
6.10 Using SDT to IP Connect to Hosts that are Serially Attached to the Gateway
Network (IP) protocols like RDP, VNC, and HTTP can also be used for connecting to host devices that are serially connected through their COM port
to the console server. To do this you must:
establish a PPP connection (Section 6.7) between the host and the gateway, then
set up Secure Tunneling—Ports on the console server (Section 6.7), then
configure SDT Connector to use the appropriate network protocol to access IP consoles on the host devices that are attached to the
Console server serial ports (Section 6.7)