Filter
Top Products
40
√
and press OK.
Setting the Display Units
To set the Units option:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
the Units option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a
setting (Fig. 75).
√
and press OK.
Setting the DMS Format
Seconds are displayed. You can either set the ONIX 110
to display degrees followed by minutes and fractions
of a minute, or you can set it to display degrees and
minutes followed by seconds and fractions of a
second.
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
the DMS Format option.
Fig. 75
Fig. 76
Changing the Map Direction (cont.)