Filter
Top Products
56
Troubleshooting
Problems Possible Solution
I pressed the power button
but the device doesn’t
the battery or the power source for ve
seconds and install it again.
The unit does not respond
when I try to move the
cursor.
The map position may be latched. Check
if the symbol is shown in the bottom
right corner of the map page. If so, press
and hold a direction key to unlatch the
device.
current position on the map
page after I have moved the
map?
Check if the symbol is showing in the
bottom right corner of the map page.
Press the ESC button to return to your
current position
The ONIX 110 fails to locate
my current position.
mode.
no obstruction such as trees or tall
buildings.
The ONIX 110 requires synchronization
with at least three satellites to identify
with your current location. Once the
position has been identied, it requires
at least one satellite to maintain status.
If available satellite signals are too low in
orbit or all in a line, it may not be able to
locate your current location