Eagle Electronics 642c Fish Finder User Manual


 
124
Route Planning command on Main Menu (left). Routes menu (center).
Edit Route menu (right) with Navigate Route command is selected.
2. Press to select saved route name|ENT. Highlight NAVIGATE and press
ENT.
3. Upon arrival at your destination, cancel navigation.
Press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,
press
MENU|MENU| to ROUTE PLANNING|ENT.
2. Press to saved route name|
ENT. Highlight REVERSE|ENT| to
NAVIGATE |ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Edit Route screen showing Route 1 with waypoints set to normal navi-
gation (left). Reverse command has been executed (center) reversing the
order of waypoints on the route. Pressing Navigate (right) will allow
you to navigate the route from the end to the beginning.