Filter
Top Products
77
Main Menu with Sonar Setup command selected (left). Submenu with
Sonar Simulator command selected (center). Sonar Simulator menu
(right), with simulator turned off (box is unchecked).
NOTE:
With Simulate Position checked, the simulator will automatically run
the GPS simulator, if GPS data was recorded with the sonar log.
2. To use the default sonar chart log stored in the unit, press
ENT|EXIT.
The recorded chart begins scrolling across the screen, just as if you
were on the water. To turn off the simulator, repeat Step 1.
Sonar Page playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts recorded on an MMC
card. To play back a sonar chart, install the MMC containing the
chart.
1. Press
MENU|MENU|↓ to SONAR SETUP|ENT|↓ to SONAR SIMULATOR|ENT.
2. Press ↓ to
CHART USED|ENT.
Play symbol
flashing
Title bar with chart file name