Filter
Top Products
123
2. Press ↑ to
NEW ROUTE, then press ENT. (To add to an existing route,
press ↓ ↑ to route name|
ENT.)
3. Press ↓ to
END OF ROUTE|ENT|↓ to ADD FROM MAP|ENT. The Map Page
appears with the cursor showing.
Edit Route menu (left). Edit Route Waypoints menu (right)
with Add From Map command selected.
4. Use the Zoom and arrow keys to move the map and cursor until the
cursor is centered on the spot where you want your route to begin.
5. To set the first route waypoint press
ENT. In the example below, we
moved to the entrance of the cove where our boat was docked.
Route creation sequence (from left to right): Fig. 1. Set route waypoint
(1) at the cove entrance. Fig. 2. Move cursor northeast to set point (2)
at channel entrance. Fig. 3. With point (2) set, move cursor southeast to
mark channel exit with waypoint (3). In figures 2 and 3, notice the
rubber band line extending from the previously set waypoint to the
cursor. This line will become the course for the route.
2.
3.
1.