Eagle Electronics 640C, 640cDF Fish Finder User Manual


 
132
IMPORTANT ALARM NOTES:
Anchor Alarm - The anchor alarm may be triggered even when you
are sitting still. This usually happens when using small — less than
.05 mile — anchor alarm ranges.
Arrival Alarm - If the arrival alarm distance is set to a small num-
ber, the unit may not show navigation data to the next waypoint af-
ter you arrive at the first one. That occurs when you are not able to
come close enough to the first waypoint to trip the arrival alarm.
Check MMC Files and Storage Space
To check MMC Files:
Press
MENU|MENU| to BROWSE MMC FILES|ENT. Press to MMC CARD
INFO|ENT to see the free space on the card.
Main Menu (left). MMC File Browser (right).
Communications Port Configuration
This unit has one NMEA 0183 version 2.0 compatible communication
port. The Com Port Menu, accessed from the System Setup Menu, al-
lows you to configure the communications port to send or receive data
to another electronic device. The com port can be used for NMEA or
SiRF Binary data transfer.
To set Com Port Configuration:
1. Press
MENU|MENU| to SYSTEM SETUP|ENT.
2. Press to
COMMUNICATIONS PORT|ENT.